Informationsmanagement
Refine
Year of publication
Document Type
- Conference Proceeding (69) (remove)
Is part of the Bibliography
- no (69)
Keywords
- 02 (8)
- 03 (2)
- 04 (1)
- 3GPP (1)
- 5G (6)
- 5G mobile communication (1)
- 5G use case (1)
- 5G-Technology (1)
- AAL (1)
- AI (2)
Institute
Wachsende Informationssysteme (IS) gehen oft einher mit einer wachsenden IT-Komplexität, weil sich heterogene IT-Landschaften über Jahre hinweg zu einem Flickenteppich entwickeln. Diese Entwicklung bringt steigende IT-Kosten und Abhängigkeiten mit sich, die die Wartung und Entwicklung der IT-Landschaften behindern. Der Artikel beleuchtet die aktuelle Literatur über Methoden zum Management von IT-Komplexität mit der Methodik eines Literaturreviews. Da die Definitionen von IT-Komplexität in der Literatur weit auseinandergehen, wird eine Herleitung und eine Definition aufgestellt. Außerdem werden die Ergebnisse des Literatur-Suchprozesses vorgestellt. Danach folgt eine Diskussion und Synthese der Literatur sowie ein Ausblick auf weitere Forschungsfelder.
Bedingt durch den Ausbau der dezentralen Energieversorgung steigen die Redispatch-Maßnahmen durch die Übertragungsnetzbetreiber zur Netzstabilisierung. Je nach Szenario werden in 2030 allerdings 62 - 82 % der Bruttostromnachfrage direkt in das Verteilnetz eingespeist, sodass die Verteilnetzbetreiber die Netzbilanz bereits auf NS- und MS-Ebene ausgleichen müssen. Eine Lösungskomponente dazu ist das Industrial Smart Grid; dazu sind tiefere Einblicke in die Produktionsplanung von Industrieunternehmen nötig, um das Netz proaktiv zu regeln. Die Grundlage für diese nötige Transparenz wird unternehmensintern durch die Etablierung von Energiemanagement und dazu nötigen Energieinformationssystemen geschaffen. Um eine zielgerichtete Systemauswahl für produzierende Unternehmen zu ermöglichen, ist ein grundlegender Funktionskatalog eines Energieinformationssystems zu erstellen. Dieses Paper beschreibt die Erstellung eines solchen Funktionskatalogs in Form eines übersichtlichen Funktionsbaums und einer exemplarischen Funktionsdarstellung in einem Use-Case-Diagramm.
Im Strommarkt 2.0 wird ein Paradigmenwechsel von einer verbrauchsorientierten Erzeugung zu einem erzeugungsorientierten Verbrauch durchlaufen. Dies erfordert in Zukunft ein gesteigertes Angebot von Flexibilität. Die Idee und die für das Energiesystem dienlichen Potentiale eines Flexibilitätsmarktes für die Industrie sind bekannt, dennoch werden diese Möglichkeiten zurzeit nur eingeschränkt genutzt. Es stellt sich somit die Frage, durch welche Anreize und Dienstleistungen es gelingen kann, Unternehmen zur Bereitstellung von Flexibilität zu motivieren. Hierfür werden im vorliegenden Paper die bestehenden Energiedienstleistungen und neue Flexibilitätsdienstleistungen strukturiert beschrieben und Potenziale herausgestellt.
Failure management in the production area has been intensely analyzed in the research community. Although several efficient methods have been developed and partially successfully implemented, producing companies still face a lot of challenges. The resulting main question is how manufacturers can be assisted by a sustainable approach enabling them to proactively detect and prevent failures before they occur. A high-resolution production system based on analyzed real-time data enables manufacturers to find an answer to the main question. In this context, Big Data technologies have gained importance since the critical success factor is not only to collect real-time data in the production but also to structure the data. Therefore, we present in this paper the implementation of Big Data technologies in the production area using the example of an actual research project. After the literature review, we describe a Big Data based approach to prevent failures in the production area. This approach mainly includes a real-time capable platform including complex event processing algorithms to define appropriate improvement measures.
Thanks to the challenges of the imminent energy turnaround, the power market faces a revolution regarding the energy distribution. In future, energy will not only be distributed from a limited number of large, centralized power plants but also from small, decentralized power generators, e.g. households. This also affects manufacturing companies, which are confronted with developing an energy management strategy. As those companies usually have not set high priorities on their energy management, there is a lack of a structured procedure to build an energy management strategy. Consequently, this creates the need for supporting methods to develop and implement an energy management strategy. This paper tackles the first step in the development of an energy management strategy. For this purpose, a target map is developed and possible use cases are systematized. The next steps of the implementation are presented using the example of load management.
Holistic PLM- Model
(2010)
Product Lifecycle Management (PLM) is a widely discussed topic concerning the increase of efficiency of product development in terms of time to market as well as customizing products to the different needs of customers worldwide adequately. Historically PLM focuses the early phases of the product’s lifecycle, namely the product development phase. Therein the roots of PLM are based in supporting the information logistics of product data: Consistent data sets should be available to all stakeholders in the different departments at all times. Due to the increasing product complexity PLM has to be extended in terms of the temporal dimension (not limited to product development phase) and systemic dimension (not limited to the information logistic aspect). In this paper the authors derive a holistic framework for Product Lifecycle Management by analysing existing integrated management approaches. The framework consists of four dimensions: PLM strategy, PLM process, Product structure and PLM IT-Architecture. The sustainability and benefits of the framework is demonstrated by applying the framework to the communication service provider industry (CSP).
With big data-technologies on the rise, new fields of application appear in terms of analyzing data to find new relationships for improving process under-standing and stability. Manufacturing companies oftentimes cope with a high number of deviations but struggle to solve them with less effort. The research project BigPro aims to develop a methodology for implementing counter measures to disturbances and deviations derived from big data. This paper proposes a methodology for practitioners to assess predefined counter measures. It consists of a morphology with several criterions that can have a certain characteristic. Those are then combined with a weighting factor to assess the feasibility of the counter measure for prioritization.
With the development of publicly accessible broker systems within the last decade, the complexity of data-driven ecosystems is expected to become manageable for self-managed digitalisation. Having identified event-driven IT-architectures as a suitable solution for the architectural requirements of Industry 4.0, the producing industry is now offered a relevant alternative to prominent third-party ecosystems. Although the technical components are readily available, the realisation of an event-driven IT-architecture in production is often hindered by a lack of reference projects, and hence uncertainty about its success and risks. The research institute FIR and IT-expert synyx are thus developing an event-driven IT-architecture in the Center Smart Logistics' producing factory, which is designed to be a multi-agent testbed for members of the cluster. With the experience gained in industrial projects, a target IT-architecture was conceptualised that proposes a solution for a self-managed data-ecosystem based on open-source technologies. With the iterative integration of factory-relevant Industry 4.0 use cases, the target is continuously realised and validated. The paper presents the developed solution for a self-managed event-driven IT-architecture and presents the implications of the decisions made. Furthermore, the progress of two use cases, namely an IT-OT-integration and a smart product demonstrator for the research project BlueSAM, are presented to highlight the iterative technical implementability and merits, enabled by the architecture.
Manufacturing companies face the challenge of managing vast amounts of unstructured data generated by various sources such as social media, customer feedback, product reviews, and supplier data. Text-mining technology, a branch of data mining and natural language processing, provides a solution to extract valuable insights from unstructured data, enabling manufacturing companies to make informed decisions and improve their processes. Despite the potential benefits of text mining technology, many manufacturing companies struggle to implement use cases due to various reasons. Therefore, the project VoBAKI (IGF-Project No.: 22009 N) aims to enable manufacturing companies to identify and implement text mining use cases in their processes and decision-making processes. The paper presents an analysis of text mining use cases in manufacturing companies using Mayring's content analysis and case study research. The study aims to explore how text mining technology can be effectively used in improving production processes and decision-making in manufacturing companies.
The agricultural industry is facing unprecedented challenges in meeting the growing demand for food while minimizing its impact on the environment. To address these challenges, the industry is embracing technological advancements such as 5G networks to improve efficiency and productivity. However, the benefits of 5G technology must be weighed against the costs of implementing a suitable network. This paper presents cost-benefit dimensions that are needed to assess the economic feasibility of implementing 5G networks for several agricultural applications. The paper describes the costs of deploying and maintaining a 5G network and the benefits of several 5G-specific use cases, including precision agriculture, livestock monitoring, and swarm robotics. Using industry reports and case studies, the model quantifies the benefits of 5G networks, such as enabling new digital agricultural processes, increased productivity, and improved sustainability. It also considers the costs associated with equipment and infrastructure, as well as the challenges of deploying a network in rural areas. The results demonstrate that 5G networks can provide significant benefits to agricultural businesses and provide an overview about the cost factors. Both benefit and cost dimensions are analyzed for the 5G-specific agricultural use cases.
Die Zeiten, in der die Energiewende allein durch den Ausbau erneuerbarer Energien beschrieben werden konnte, sind vorbei und die Industrie wird zunehmend unter dem Begriff der Energieeffizienz in die Energiewende integriert. Energie-Auditierung und ISO-Zertifizierung sind dabei nur der Anfang. In diesem Beitrag wird das Internet der Dinge (IoT) als Lösungsansatz untersucht und dabei die Synergien von Energiewende und Industrie 4.0 betrachtet. Der Fokus liegt auf den mit dem IoT verbundenen Potentialen für Energieinformationssysteme und der darin vorhandenen Datenanalytik.
The adoption of artificial intelligence (AI) technologies in manufacturing companies is challenging, particularly for SMEs that lack the necessary skills to develop and integrate AI-based applications (AI applications) into their existing IT system landscape. To address this challenge, the research project VoBAKI (IGF-Project No.: 22009 N) aims to enable SMEs to identify and close skill gaps related to AI application development and implementation using proper sourcing strategies. This paper presents the interim results from the second phase of the project, which involves identifying the tasks in the lifecycle of AI applications and determining the specific skills required for executing these tasks. The presented results provide a detailed lifecycle including the phases for the development and usage of AI applications, as well as the specific tasks that SMEs must consider when implementing an AI application. These results serve as the foundation for future research regarding the required skills to execute the presented tasks and provide a roadmap for SMEs to close skill gaps and successfully implement AI applications.
Crisis situations can lead to extreme consequences for society and the economy, such as the disruption of supply chains and the collapse of critical infrastructure. The challenge for optimal crisis preparation lies in the unpredictability of causes, duration and scope, and severity. AI-based resilience services can aid in crisis preparation by providing software-based warnings, recommendations, and countermeasures. The aim of this paper is to present a method for evaluating such services in terms of their usefulness and acceptance. A questionnaire is presented, and the results of its piloting phase are disseminated. With these results, existing and projected AI-based services for crisis prevention can be evaluated.
The main challenge in all application areas of EV usage still is the energy storage within, as well as the energy transmission into an EV. However, this storage and transmission of energy also allows for synergies with a smart grid, if the information is adequately exchanged between roles in the energy and mobility sector. Since the energy transmission is a so called “fixed and intersection point” of E-Mobility, interoperability is required not only on an electrical (e.g. plugs), but also on an informational level. Standardization efforts are currently underway (e.g. IEC 15118), yet a comprehensive, consolidating view on the information system around energy transmission is missing. Therefore, this paper suggests a generic information system architecture for e-mobility (EM-ISA) derived from the Smart Grid Architecture Model (SGAM). EM-ISA shall be a base for companies to develop innovative services for their particular, ICT-enabled E-Mobility application area while at the same time stay at important points informational interoperable at the fixed and intersection point of energy transmission.
Systematization models for taylor-made sensor system applications and sensor data fit in production
(2015)
Industrial digitalization to realize smart factories is driven by an informatory base of high-resolution data provided by sensor systems on the shop-floor level. The challenge of technical availability of fitting measurement solutions nowadays turns in a struggle of finding the optimal solution for a specific task in an ever-growing sensor market. This paper analyzes and specifies necessary models to systematically derive and describe organizational, technical and informatory requirements for sensor system applications increasing the technological fit for faster integration and lower misinvestment rates.
In recent years supply chain participants are increasingly suffering the effects of disturbances in transportation supply chains. Both, dynamics in consumer demands and global supply chains lead to a growth in unplanned supply chain events. These can cause from rather manageable disturbances through to complete break-downs of transportation chains, resulting in high follow-up and penalty costs.
Consequently, concepts for an efficient supply chain disturbance management are needed, preferably with a real-time identification and reaction to disturbance events. Therefore in the following paper the research results of the German research project Smart Logistic Grids with the focus on designing an integrated model for the real-time disturbance management in transportation supply networks are presented. This includes the introduction of elaborated classification models for disturbances and action patterns as well as an associated costs and performance measurement system. Finally, a procedure model for the disturbance management is presented.
In this paper, an approach towards energy management 4.0 will be presented. Energy management 4.0 is understood as an encompassing energy data based concept for manufacturing companies acting in an flexible energy grid of the future with the final goal of autonomous self-optimization Controlling, supervising and scheduling production and logistic steps based on a reliable communication infrastructure and real time data in accordance to achieve a maximum of profitability with regard to human factor is executed.
Guided by a four maturity levels of the "acatech Industrie 4.0 Maturity Index" developed by the German National Academy of Science and Engineering (acatech) different use cases are presented according to the steps of visibility, transparency, prognostic capacity and self-optimization. The basic idea of energy management 4.0 is described and an outlook of further steps that are needed to be evaluated for an implementation are presented.
Growing information systems (IS) often come along with growing IT complexity, because of emerging rag rug landscapes. This development causes rising IT costs and dependencies, which hinder the maintenance and expansion of the IS landscape. This article outlines the current research on published and presented methods to manage the rising IT complexity in a literature review. Because definitions of “IT complexity” vary a lot in literature, this paper also includes a definition of the term. In addition to that, it delivers a presentation of the used research methodology. Subsequently, it presents the findings in literature, highlights the research gap and – based on the literature analysis – presents, the steps that need to be taken. A discussion of the results and a summary complete the article.
In order to introduce load management in the manufacturing industry, some obstacles need to be pointed out. This paper presents a feasible approach on how to implement load management measures in companies. To do so, load management and energy management are explained and distinguished in a first step. Subsequently, the implementation method is introduced. Therefore, by using this paper, companies will be enabled to use load management measure and reduce their energy costs significantly.
Nowadays, cyber physical systems support the improvement of efficiency in intralogistics by controlling and manipulating the production and logistic environment autonomously. Due to the complexity of the individual production processes, designing suitable cyber-physical systems based on their existing production environment is a challenge for companies.
This paper presents a new methodology on how to design cyber-physical systems conceptually to suit an individual production environment. Compared to existing design approaches, this methodology matches immediately the required functions to existing information and communication technology’s components insisting on the neutral assimilation of requirements.
Therefore, the requirement specification asks for needed functions in relating to offered functions of information and communication technology (ICT) components. The paper focusses the use case of implementing a cutting-edge mobile network technology into an existing tracking and tracing process.
The manufacturing industry has to exploit trends like “Industrie 4.0” and digitization not only to design production more efficiently, but also to create and develop new and innovative business models. New business models ensure that even SMEs are able to open up new markets and canvass new customers. This means that in order to stay competitive, SMEs must transform their existing business models.
The creation of new business models require smart products. The required data base for new business models cannot be provided by SMEs alone, whereas smart products are able to provide a foundation, given the creation of smart data and smart services they enable. These services then expand functions and functionality of smart products and define new business models.
However, the development of smart products by small and medium-sized enterprises is still lined with obstacles. Regarding the product development process the inclusion of smart products means that new and SME-unknown domains diffuse during the process. Although there are many models regarding this process there appears to be a substantial lack of taking into account the competencies enabled by the implementation of digital technologies. Hence, several SME-supporting approaches fail to address the two major challenges these enterprises are faced with. This paper generally describes valid objectives containing relevant stakeholders and their allocation to the phases of the product life cycle.
Within each objective the potential benefit for customers and producers is analyzed. The model given in this paper helps SMEs in defining the initiation of a product development project more precisely and hence also eases project scoping and targeting for the smartification of an already existing product.
Due to the drastically increasing amount of data, decision making in companies heavily relies on having the right data available. Also because of an increasing complexity of structures and processes, quick and precise flows of information become more important.
This paper introduces a new approach for modelling information flows, creating a basis for an efficient information management. It can be used to structure the information requirements and identify gaps within the information processing.
To display its benefits, the proposed Information Logistics Notation (ILN) is applied to the information logistics of todays and future energy market and grid stability management, both processes of increasing complexity.
The integration of renewable energies in a local industrial environment is an urgent task to reduce greenhouse gas emissions. Their energy intensive processes and local energy generation make waste management companies to optimal areas to analyze micro grids. The combination of the main task to process arriving waste and the reaction on micro grid needs without disregarding user preferences is the challenge that is focused with the following approach applying machine learning techniques.
First, the amount of waste is predicted with an artificial neural network. Then, the waste processing is optimized via an augmented Lagrangian algorithm regarding the energy costs that are based on volatile energy prices influenced from renewable energies. In addition, the optimization regards user preferences, which are learned from a user feedback with a support vector machine.
For the user interaction, an active learning paradigm is used. The approach is applied on biological waste treatment process in the waste management company of the district of Warendorf. The results show that the energy consumptions can be controlled in a micro grid context within the frame of user preference.
Digitalization and Industry 4.0 continue to shape our industrial environment and collaboration. For many enterprises, a key challenge in moving forward in this matter is the integration of their shop-floor systems (hard- and software) with their office-floor systems to harvest the full potential of industry 4.0.
A multitude of different technologies and respective use-cases available on the market leave many companies startled. This paper presents a set of use-cases for IT-OT-Integration to bring transparency into a company’s digital transformation.
Additionally, a technical requirements profile for integrating IT- and OT-Systems based on the use cases is presented. Both, use-cases and their requirements, guide companies in selecting the digitalization measures that fit their current situation and help in identifying technical challenges that need to be addressed in the transformation process.
Increasing the energy efficiency and meanwhile avoiding unplanned maintenance breaks are keys for manufacturing companies to stay competitive in the future. This paper presents an energy saving and maintenance cost reducing approach for manufacturing environments. The approach describes first occurring types of energy wastage within manufacturing and characterizes them in more detail. Including additional external information, the significance of an identified on-going wastage can be determined. Based on the type of wastage and the significance; concrete recommendations for measures to prevent the wastage are delivered. The identified wastage facilitates detecting inefficient operating mode as well as wearing and malfunctioning at machines. By using complex event processing technologies realtime information can forwarded directly to the responsible persons to enable quick reactions to prevent energy wastage and unplanned downtimes. The paper presents an approach to identify detection and propose concepts for manufacturing enterprises. The information processing procedure is used for the implementation of two Use Cases.
Digital technologies such as 5G, augmented reality, and artificial intelligence (AI) are currently being used in various ways by manufacturing companies. As the fourth industrial revolution progresses, it has become apparent that reckless use and inadequate regulation of these technologies have a detrimental effect on the environment in which they are utilized. Therefore, regulation of digital technologies is imperative today to ensure more responsible and sustainable use. While governments usually establish regulations, progress is not keeping pace with the demands and hazards of employing digital technologies. The European AI law serves as an example of the considerable distance yet to be covered before binding guidelines are established. Consequently, companies must take proactive measures today to ensure that they use digital technologies responsibly in their environments. In this context, identifying which digital technologies are pertinent to manufacturing companies in terms of regulation is crucial. Furthermore, a comprehensive approach is required to design compliance holistically for digital technologies and to systematically derive the corresponding guidelines. This paper introduces a set of models that not only determine the importance of
compliance in the application of different technologies but also present a framework for methodically designing compliance. Furthermore, the paper contributes to the development of an AI platform in the German research project PAIRS by investigating the compliance relevance of applications such as artificial intelligence.
Industrie 4.0 is changing the industrial landscape in an unanticipated way. The vision for manufacturing industries is to transform to an agile company, in order to react on occurring events in real-time and make data based decisions. The realization requires also new capabilities for the information management. To achieve this goal agile companies require taking measured data, analyzing it, deriving knowledge out of this and support with the knowledge their employees. This is crucial for a successful Industrie 4.0 implementation, but many manufacturing companies struggling with these requirements. This paper identifies the required capabilities for the information management to achieve a successful Industrie 4.0 implementation. [https://link.springer.com/chapter/10.1007/978-3-319-65151-4_3]
Companies are transforming from transactional sales to providing solutions for their customers. Mostly, smart products, enabling companies to enhance their products by providing smart services to their customers, are a key building block in this transformation. However, the development of a smart product requires many digital skills and knowledge, which regular companies do not have. To facilitate the design and conceptualization of smart products, this paper presents a use-case-based information systems architecture prototype for smart products. Furthermore, the paper features the application and evaluation of the architecture on two different smart product projects. The use of such an architecture as a reference in smart product development serves as a huge advantage and accelerator for inexperienced companies, allowing faster entry into this new field of business. [https://link.springer.com/chapter/10.1007/978-3-031-14844-6_16]
Low-Level-Code Based Production Model For Improving Material Requirements Planning In ERP Systems
(2021)
Single and small-series production companies face specific challenges, such as variable customer order decoupling points (CODP), decreasing quantities and rising cost pressure. This leads to a increasing production complexity and growing requirements on Production Planning and Control (PPC). Digitalization’s direct links between objects, people, and machines as well as detailed recording of production progresses opens new solutions for PPC. However, volume of data and the required processing times are increasing. Thus, to achieve near-real-time data processing, a decentralization of decision-making systems can be observed. The function Material Requirements Planning (MRP) is PPC’s original need for Enterprise Resource Planning (ERP) systems. Here, PPC’s overall problem (to fulfil primary requirements for products) is divided into subproblems (to fulfil single production orders). Especially companies characterized by an organization in accordance to the workshop principle, high in-house production depth and variable CODP are confronted with high dynamics in their production systems. This ends in significant differences between primary requirements (overall problem) and single production orders (subproblems). Ultimately, these insufficient PPC data result systematically in a non-optimal overall solution despite optimal partial solutions. This publication combines PPC’s fundamentals from existing commonly known models with current implementation concepts of ERP systems. A newly developed Low-Level-Code based Production Model provides explanations for deviations between the overall problem and its subproblems. Furthermore, information flows of PPC can be structured between a periodically actualized vertical and an event driven horizontal information flow. These recognitions lead to an improvement of PPC by ERP systems.
The digital transformation brings up various new tasks to manage new business application software and integrate them into existing business processes and legacy systems, which are necessary to keep e.g. a production system running. Today, all these tasks are on the one hand not clearly defined and on the other hand, responsibility of these cross-disciplinary tasks is unclear in companies being mostly structured in a function-oriented way. While quality management has developed to a firmly established function of process excellence years ago, IT-application management is still to become an inevitable part of the digital transformation. There are just a few authors trying to define and describe this part, the related tasks, and necessary roles in an organization. In this paper, we show how the business needs of a company can influence the ideal adaptation of the digitization solutions and thus become the success of the digital transformation. We base the paper on a use case in manufacturing companies. We then describe how companies deal with business application systems today. Based on the framework Aachen Digital Architecture Management we describe how a company can holistically improve the management of business application systems.
Industry 4.0 is driven by Cyber-Physical Systems and Smart Products. Smart Products provide a value to both its users and its manufacturers in terms of a closer connection to the customer and his data as well as the provided smart services. However, many companies, especially SMEs, struggle with the transformation of their existing product portfolio into smart products. In order to facilitate this process, this paper presents a set of smart product use-cases from a manufacturer’s perspective. These use-cases can guide the definition of a smart product and be used during its architecture development and realization. Initially the paper gives an introduction in the field of smart products. After that the research results, based on case-study research, are presented. This includes the methodological approach, the case-study data collection and analysis. Finally, a set of use-cases, their definitions and components are presented and highlighted from the perspective of a smart product manufacturer.
Electronic appliance manufacturers are facing the challenge of frequent product orders. Based on each product order, the assembly process and workstations need to be planned. An essential part of the assembly planning is defining the assembly sequence, considering the mechanical product’s design, and handling of the product’s components. The assembly sequence determines the order of processes for each workstation, the overall layout, and thereby time and cost. Currently, the assembly sequence is decided by industrial engineers through a manual approach that is time-consuming, complex, and requires technical expertise. To reduce the industrial engineers’ manual effort, a Computer-Aided Assembly Sequence Planning (CAASP) system is proposed in this paper. It compromises the components for a comprehensive system that aims to be applied practically. The system uses Computer-Aided Design (CAD) files to derive Liaison and Interference Matrices that represent a mathematical relationship between parts. Subsequently, an adapted Ant Colony Optimization Algorithm generates an optimized assembly sequence based on these relationships. Through a web browser-based application, the user can upload files and interact with the system. The system is conceptualized and validated using the CAD file of an electric motor example product. The results are discussed, and future work is outlined.
Digital technologies have gained significant importance in the course of the 4th Industrial Revolution and these technologies are widely implemented, nowadays. However, it is necessary to bear in mind that an ill-considered use can quickly have a negative impact on the environment in which the technology is used. For more responsible and sustainable use, the regulation of digital technologies is therefore necessary today. Since the government is taking a very slow response, as the example of the AI Act shows, companies need to take action themselves today. In this context, one of the central questions for companies is: "Which digital technologies are relevant for manufacturing companies in terms of regulation? This paper conducted a quantitative Delphi study to answer this question. The results of the Delphi study are presented and evaluated within the framework of a data analysis. In addition, it will be discussed how to proceed with the results so that manufacturing companies can benefit from them. Furthermore, the paper contributes to the development of an AI platform in the German research project PAIRS by investigating the compliance relevance of artificial intelligence applications.
Crises are becoming more and more frequent. Whether natural disasters, economic crises, political events, or a pandemic - the right action mitigates the impact. The PAIRS project plans to minimize the surprise effect of these and to recommend appropriate actions based on data using artificial intelligence (AI). This paper conceptualizes a cascading model based on scenario technique, which acts as the basic approach in the project. The long-term discipline of scenario technique is integrated into the discipline of crisis management to enable short-term and continuous crises management in an automated manner. For this purpose, a practical crisis definition is given and interpreted as a process. Then, a cascading model is derived in which crises are continuously thought through using the scenario technique and three types of observations are classified: Incidents, disturbances, and crises. The presented model is exemplified within a non-technical application of a use case in the context of humanitarian logistics and the COVID-19 pandemic. Furthermore, first technical insights from the field of AI are given in the form of a semantic description composing a knowledge graph. In summary, a conceptual model is presented to enable situation-based crisis management with automated scenario generation by combining the two disciplines of crisis management with scenario technique.
In road haulage, transports are interrupted by truck drivers to comply with driving and rest times. On long-distance routes, these interruptions lead to a considerable increase in transport time. Transport interruption can be avoided by so-called relay traffic: a vehicle (e. g. semi-trailer) is handed over to a rested driver at the end of the driving time. This type of transport requires a certain company size. In Germany, however, transport companies have 11 employees on average. Intra-company relay traffic is therefore not economically viable for most transport companies. To organize an intermodal transport across forwarding companies, long-distance routes need to be split into partial routes to divide them between freight forwarders and carriers. This paper presents a data concept for an algorithm to find the best possible route sections along a previously defined start and endpoint. The developed data concept includes order-specific data, forwarder-specific data, real-time traffic data, geographical data as well as data from freight forwarding software and telematics to be the basis for the route sectioning algorithm. In this paper, different data sources, external services and logistic systems are analyzed and evaluated. It is shown which data is needed and what the best ways are to select and derive this data from the different data sources.
Feeding the growing world population is a scientific and economic challenge. The target variables to be optimised are the yield that can be produced on a given area and the reduction of the resources used for this purpose. High-wage countries are faced with the problem that the use of personnel is a significant cost driver. Developing countries, on the other hand, usually operate on much smaller field sizes, so that the work in the field is still strongly characterised by manual labour. One solution to meet these challenges is the use of smaller autonomous harvesting robots. These can be networked into a swarm of machines to work even larger fields. The networking of autonomous agricultural machines is a key use case for rural 5G networks. 5G technology can offer many advantages over older mobile communications standards and therefore make use cases more efficient or enable new ones. Various use cases are also conceivable in the field of agriculture, yet it is unclear how 5G networks can and must be specified for this purpose. In this paper, using the example of 5G-connected harvesters powered by swarm robotics, we present the challenges that have arisen and the specification that has been developed.
5G offers the manufacturing industry a wireless, fast and secure transmission technology with high range, low latency and the ability to connect a large number of devices. Existing transmission technologies are reaching their limits due to the increasing number of networked devices and high demands on reliability, data volume, security and latency. 5G fulfills these requirements and also combines the potential and use cases of previous transmission technologies so that unwanted isolated solutions can be merged. Use cases of transmission technologies that previously required a multitude of solutions can now be realized with a single technology. However, the general literature often refers to 5G use cases that can also be realized over cables in particular. In this paper, a literature review presents the current state of research on the various 5G application scenarios in production . Furthermore, concrete characteristics of 5G use cases are identified and assigned to the identified application scenarios. The goal is to verify the identified 5G use cases and to work out their 5G relevance in order to be able to concretely differentiate them from already existing Industrie 4.0 applications.
Manufacturing companies worldwide recognized the high potential of Industrie 4.0 in order to increasing production efficiency. Key benefits include creation of integrated systems, networked products and improvement of service portfolios. However, for many companies deriving and evaluating necessary measures to use Industrie 4.0 potentials represents a major challenge. This paper introduces the "acatech Industrie 4.0 Maturity Index" as an approach to meet this challenge. The development of multidimensional maturity model intents to provide companies an assessment methodology. The aim is to capture the status quo in companies in order to be able to develop individual roadmaps for the successful introduction of Industrie 4.0 and manage the transformation progressively.
Nowadays, the market for information and communication technologies used for IOT-applications grows daily. Since companies need technologies to transform their business processes corresponding to the digital revolution, they need to know which technologies are available, and fit the best for their use case. Their inertial issue is the lacking overview of technologies suitable to connect their production or logistics. Hence, this paper presents a methodology to select technologies (and combinations) based on their functions. It differentiates between information and communication technologies, digital technologies and connecting technologies by the physical function and its role in a cyber-physical system. Depending on the use case, the applicability of every technology varies. Due to that reason, the paper illustrates a ranked qualification of the technologies for typical use cases, focussing tracking and tracing issues in the intralogistics of producing companies. The evaluation is performed upon a literature research, a market study to identify suitable technologies, and various expert interviews to assess the applicability of the technologies.
Digitalization is changing the industrial landscape in a way we did not anticipate. The manufacturing industries worldwide are working to develop strategies and concepts for what is labelled with different terms such as the Industrial Internet of Things in the USA or Industrie 4.0 in Germany. Many industrialized economies are driven by the production sector and this sector needs specific approaches and instruments to take up other than those approaches we know from start-ups and ventures coming from Silicon Valley and other places. In this paper, we demonstrate an appropriate approach to transform producing companies in a systematic and evolutionary approach.
In particular, the objective of this paper is to provide results from two initiatives which conceptually build upon each other and are of particular relevance for the production industry. First, we present a global survey on the state of implementation and the future perspectives of the concept Industrie 4.0 from 2016. Findings from this study have forced parts of the German industry to heavily invest into a common approach to accelerate change towards Industry 4.0 in order to stay competitive in worldwide economy. This approach is presented in a second part.
Assessment of IS Integration Efforts to Implement the Internet of Production Reference Architecture
(2018)
As part of a collaborative network, manufacturing companies are required to be agile and accelerate their decision making. To do so, a high amount of data is available and needs to be utilized. To enable this from a company internal information system perspective, the Internet of Production (IoP) describes a future information system (IS) architecture. Core element of the IoP is a digital platform building the basis for a network of cognitive systems. To implement and continuously further develop the IoP, manufacturing companies need to make architecture-related decisions concerning the accessibility of data, the processing of the data as well as the visualization of the information. The goal of this research is the development of a decision-support methodology to make those decisions, taking under consideration the evaluated IS integration effort. Therefore, this paper describes the allocation of IS functions and identifies the effort drivers for the respective IS integration by analyzing the integration possibilities. Conclusively this approach will be validated in a case study.
Nowadays manufacturing companies are facing many different challenges as they are finding themselves in a dynamic and complex environment. Industrie 4.0 and its principles can help to manage these challenges. For example, companies should follow a principle called continuity of engineering. This continuity enables parallel development and production planning. One important measure to allow a continuity of engineering is the appropriate integration of IT (Information Technology) and OT (Operational Technology) within the company as well as along the whole value chain. Meant is the networking of machines and plant equipment with IT systems. The management of information resources for example allows data based decisions. Therefore, companies need to have a profound knowledge about the relationship between the integration and information processing of information systems.
There is a common understanding that a certain degree of IT and OT integration highly depends on the company’s typology, which we found out can be represented by the company’s business model. Therefore, we developed a methodology to identify the company’s business model and to derive relevant success factors, both based on a workshop-concept. Based on expert interviews, this enabled us to link the business model or company’s typology with the most important information management principles.
Especially in SMEs of the manufacturing industry, data is not sufficiently used to optimize processes. Some companies have implemented lighthouse “Industrie 4.0 projects”, but struggle with a broader approach. We present the results of a survey we performed that underlines that statement. There are approaches in the literature that propose generic architecture frameworks tackling the mentioned challenge. Still, most of them do not include the existing IT architecture of a company and fail to propose a comprehensive solution delivering a real benefit to companies. Therefore, companies cannot easily use them. For that reason, we developed and tested an Industrie 4.0 software platform architecture companies can use as a blueprint for their own implementation. This architecture is presented in this paper as well as the structured VDI 2221 approach we used to develop it.
People’s (and goods’) transport will fundamentally change due to autonomous driving and emission-reduced drives. This enables new mobility concepts, especially for inner-city transport of people. An example for such autonomous vehicles are so-called people-movers: small electrically powered busses carrying up to 15 passengers from individual departure points to individual destinations. Next to the research regarding autonomous driving and alternative types of drives, it is also necessary to study and research how future users are willing to use new types of inner-city transport. Such transport needs specific information platforms organizing the trips and routing the people mover. Those platforms do not yet exist.
As part of our research, we developed an exemplary people-mover platform architecture. We were using methods from agile software development to gather customer requirements, as well as an information logistics concept as a validated link between user requirements and the architecture. We designed the architecture using microservices to enable growth and adaptability at the same time. As the research is still going on, these characteristics are necessary in order to keep building a customer-focused platform for the inner-city mobility of the future.
Management of information and the IT systems it is stored in becomes a crucial capability for the industry. However, companies are struggling with the management of the various requirements and frequent changes of technology. Thus, IT complexity has become a major challenge for companies. At the same time, especially manufacturing companies are striving to implement Industrie 4.0 concepts. Many of these even have developed an Industrie 4.0 roadmap including various projects to change the company. Companies can develop such roadmaps by applying the Industrie 4.0 Maturity Index that gives a broad view on necessary capabilities for Industrie 4.0.
In our research, we analyzed data sets from over 10 manufacturing companies that have performed an Industrie 4.0 maturity assessment. Our hypothesis was that IT complexity challenges are hindering the implementation of Industrie 4.0 roadmaps significantly. We could prove this hypothesis at least for the companies analyzed and give insights on the specific challenges. Based on our analysis, we conclude our article by giving concrete recommendations on how to tackle IT complexity.
Methods of machine learning (ML) are notoriously difficult for enterprises to employ productively. Data science is not a core skill of most companies, and acquiring external talent is expensive. Automated machine learning (Auto-ML) aims to alleviate this, democratising machine learning by introducing elements such as low-code / no-code functionalities into its model creation process. Multiple applications are possible for Auto-ML, such as Natural Language Processing (NLP), predictive modelling and optimization. However, employing Auto-ML still proves difficult for companies due to the dynamic vendor market: The solutions vary in scope and functionality while providers do little to delineate their offerings from related solutions like industrial IoT-Platforms. Additionally, the current research on Auto-ML focuses on mathematical optimization of the underlying algorithms, with diminishing returns for end users. The aim of this paper is to provide an overview over available, user-friendly ML technology through a descriptive model of the functions of current Auto-ML solutions. The model was created based on case studies of available solutions and an analysis of relevant literature. This method yielded a comprehensive function tree for Auto-ML solutions along with a methodology to update the descriptive model in case the dynamic provider market changes. Thus, the paper catalyses the use of ML in companies by providing companies and stakeholders with a framework to assess the functional scope of Auto-ML solutions.
Methods of machine learning (ML) are difficult for manufacturing companies to employ productively. Data science is not their core skill, and acquiring talent is expensive. Automated machine learning (Auto-ML) aims to alleviate this, democratizing machine learning by introducing elements such as low-code or no-code functionalities into its model creation process. Due to the dynamic vendor market of Auto-ML, it is difficult for manufacturing companies to successfully implement this technology. Different solutions as well as constantly changing requirements and functional scopes make a correct software selection difficult. This paper aims to alleviate said challenge by providing a longlist of requirements that companies should pay attention to when selecting a solution for their use case. The paper is part of a larger research effort, in which a structured selection process for Auto-ML solutions in manufacturing companies is designed. The longlist itself is the result of six case studies of different manufacturing companies, following the method of case study research by Eisenhardt. A total of 75 distinct requirements were identified, spanning the entire machine learning and modeling pipeline.
Factory automation and production are currently
undergoing massive changes, and 5G is considered being a key
enabler. In this paper, we state uses cases for using 5G in the
factory of the future, which are motivated by actual needs of the
industry partners of the “5Gang” consortium. Based on these use
cases and the ones by 3GPP, a 5G system architecture for the
factory of the future is proposed. It is set in relation to existing
architectural frameworks.
Technology management can significantly influence the strategic decisions of a company and thus cause success or failure. Basic templates for technology management are technology radars as well as the determination of the technology readiness level (TRL) to be able to evaluate the maturity of newly deployed technologies (e.g., newcomer vs. established). The radars, as well as the TRL, are identified in time-consuming, manual research by subject matter experts from external consultancies. This process is often repeated due to the further development and new development of technologies so that the necessary research becomes an ongoing task. The TechRad research project, therefore, aims to automate the identification of the TRL as well as technology radars using web crawling and Natural Language Processing (NLP). To commercialize the pre-competitive prototype, the development of a pre-competitive business model is the goal of this paper. Based on customer analyses, a target group definition is created. Based on user interviews, the precompetitive business model will be detailed in a four-step approach using a business model canvas and a value proposition canvas.
The operation of CNC milling is expensive because of the cost-intensive use of cutting tools. The wear and tear of CNC tools influence the tool lifetime. Today’s machines are not capable of accurately estimating the tool abrasion during the machining process. Therefore, manufacturers rely on reactive maintenance, a tool
change after breakage, or a preventive maintenance approach, a tool change according to predefined tool specifications. In either case, maintenance costs are high due to a loss of machine utilization or premature tool change. To find the optimal point of tool change, it is necessary to monitor CNC process parameters during machining and use advanced data analytics to predict the tool abrasion. However, data science expertise is limited in small-medium sized manufacturing companies. The long operating life of machines often does not justify investments in new machines before the end of operating life. The publication describes a cost-efficient approach to upgrade legacy CNC machines with a Tool Wear Prediction Upgrade Kit. A practical solution is presented with a holistic hardware/software setup, including edge device, and multiple sensors. The prediction of tool wear is based on machine learning. The user interface visualizes the machine condition for the maintenance personnel in the shop floor. The approach is conceptualized and discussed based on industry requirements. Future work is outlined.
Subscription business transforms traditional business models of machinery and plant engineering. Many manufacturing companies struggle to pull out the potential created by Industry 4.0 and make it economically usable. In addition to technological innovations, it is necessary to transform the business model. This leads to a shift from ownership-based and product-centric business models to outcome-based business models, which focus on the customer's value and thus realize a unique value proposition and competitive advantage – the outcome economy. Based on a case study analysis among manufacturing companies, this paper provides further clarification including a definition and constituent characteristics of subscription business models in machinery and plant engineering.
The digital transformation is changing the way companies think and design their manufacturing environment. Both due to the increasing number of connections between IoT-Devices, tooling machines, and production lines and the phenomenon of the convergence of IT and OT, systems are becoming more complex than years ago. Organizational and cultural changes within manufacturing companies strengthen this trend and form Industry 4.0 environments and cyber-physical production systems (CPPS). As these systems do not longer stay alone but are connected to each other and the company’s outside, the size of the potential attack surface is increasing as well. Besides that, manufacturing companies, small and medium-sized in particular, are facing complex challenges based on lack of knowledge, budget, and time to understand as well as to interpret their current situation and risk level and therefore to derive necessary counter-measures. Efficient as well as pragmatic tools and methods for these companies do not exist. This paper shows a research approach in which the company-specific set-up of Industry 4.0 environment and CPPS is characterized by its potential vulnerabilities. This enables companies to evaluate their risk potential before setting up this kind of environments and to undJo,erstand the potential consequences more precisely. By doing so, companies can derive and prioritize important counter-measures and so to strengthen their level of cyber-security efficiently. This will decrease the number of cyber-security attacks and increase the company’s competitiveness.
The COVID-19 pandemic has shown companies that their on-premise infrastructures often reach their limits with a large number of remote accesses. The transition to cloud-based solutions could represent a more efficient alternative. However, many German companies, especially small and medium-sized enterprises (SME), are still hesitant to take this big step of transferring applications to the cloud. For this reason, this paper examines the question of whether existing migration approaches in the analysis phase fit the specific requirements of SMEs. Using a literature review methodology, we first identify and analyze determinant factors for cloud adoption in SMEs. On this basis, we analyze existing methods in the analysis phase for migrations from on-premise software to cloud solutions. We investigate whether these factors are considered in the analysis phase of the approaches and conclude their suitability for SMEs. Of the migration approaches we examined, none included all the factors we identified as relevant to SMEs. Fewer have considered all factors fully and in detail. We present the results of the literature search process in tabular form and conclude this paper with a discussion and synthesis of the literature as well as an outlook on further research fields.
In the age of digitalization, manufacturing companies are under increased pressure to change due to product complexity, growing customer requirements and digital business models. The increasing digitization of processes and products is opening up numerous opportunities for mechanical engineering companies to exploit the resulting potential for value creation. Subscription business is a new form of business model in the mechanical engineering industry, which aims to continuously increase customer benefit to align the interests of both companies and customers. Characterized by a permanent data exchange, databased learning about customer behavior, and the transfer into continuous innovations to increase customer value, subscription business helps to make Industry 4.0 profitable. The fact that machines and plants are connected to the internet and exchange large amounts of data results in critical information security risks. In addition, the loss of knowledge and control, data misuse and espionage, as well as the manipulation of transaction or production data in the context of subscription transactions are particularly high risks. Complementary to direct and obvious consequences such as loss of production, the attacks are increasingly shifting to non-transparent and creeping impairments of production or product quality, which are only apparent at a late stage, or the influencing of payment flows. A transparent presentation of possible risks and their scope, as well as their interrelationships, does not exist. This paper shows a research approach in which the structure of subscription models and their different manifestations based on their risks and vulnerabilities are characterized. This allows suitable cyber security measures to be taken at an early stage. From this basis, companies can secure existing or planned subscription business models and thus strengthen the trust of business partners and customers.
For most industries, Artificial Intelligence (AI) holds substantial potentials. In the last decades, the extent of data created worldwide is exponentially increasing, and this trend is likely to continue. However, despite the prospects, many companies are not yet using AI at all or not generating added value. Often, an AI project does not exceed its pilot phase and is not scaled up. The problems to create value from AI applications in companies are manifold, especially since AI itself is diverse and there is no ‘one size fits all’ approach. One often stated obstacle, why many AI projects fail, is a missing AI strategy. This leads to isolated solutions, which do not consider synergies, scalability and seldom result in added value for the company. To create a company-specific AI strategy with a top-down approach, a generic but holistic framework is needed. This paper proposes a strategic AI procedure model that enables companies to define a specific AI strategy for successfully implementing AI solutions. In addition, we demonstrate in this paper how we apply the introduced strategic AI procedure model on an AI-based flexible monitoring and regulation system for power distribution grid operators in the context of an ongoing research project.
Feasibility Analysis of Entity Recognition as a Means to Create an Autonomous Technology Radar
(2021)
Mit den neuesten Technologietrends auf dem Laufenden zu bleiben, ist für Fertigungsunternehmen eine entscheidende Aufgabe, um auf einem global wettbewerbsfähigen Markt erfolgreich zu bleiben. Die Erstellung eines Technologieradars ist ein etablierter, jedoch meist manueller Prozess zur Visualisierung der neuesten Technologietrends.
Der Herausforderung, Technologien zu identifizieren und zu visualisieren, widmet sich das Projekt TechRad, das maschinelles Lernen einsetzt, um ein autonomes Technologie-Scouting-Radar zu realisieren. Eine der Kernfunktionen ist die Identifizierung von Technologien in Textdokumenten. Dies wird durch natürliche Sprachverarbeitung (NLP) realisiert.
Dieser Beitrag fasst die Herausforderungen und möglichen Lösungen für den Einsatz von Entity Recognition zur Identifikation relevanter Technologien in Textdokumenten zusammen. Die Autoren stellen eine frühe Phase der Implementierung des Entity Recognition Modells vor. Dies beinhaltet die Auswahl von Transfer Learning als geeignete Methode, die Erstellung eines Datensatzes, der aus verschiedenen Datenquellen besteht, sowie den angewandten Modell-Trainings-Prozess. Abschließend wird die Leistungsfähigkeit der gewählten Methode in einer Reihe von Tests überprüft und bewertet.
The number of cyber-attacks on small and medium enterprises (SMEs) is constantly increasing. SMEs do not recognize the attacks until the damage has occurred. Only then, they fight with measures to increase IT-security and IT-safety. Many studies come to the point that this refers to a lack of budget, expertise and awareness of the need for IT-security. There are many compendia with recommendations for action, but they are too comprehensive and unspecific to the individual needs of SMEs. In this paper, we present the results of a research activity on the gaps that address the challenges faced by SMEs. In addition, we develop a concept for a serious gaming approach that includes an economic perspective on IT-security measures and shows how SMEs can derive their own IT-seurity target state
Manufacturing companies face the challenge of selecting digitalization measures that fit their strategy. Measures that are initiated and not aligned with the company’s strategy carry the risk of failing due to lack of relevance. This leads to an ineffective use of scarce human and financial resources. This paper presents a target system to help companies select relevant digitalization measures compliant with their strategy for IT-OT-integration projects. The target system was developed based on literature research and expert interviews, and later validated in two use cases. The target system considers the goals of production companies and combines them with digitalization measures. The measures are classified by different maturity levels required for their realization. Thus, the target system enables manufacturing companies to evaluate digitalization measures with regards to their strategic relevance and the required Industrie 4.0 maturity level for their realization. This ensures an effective use of resources.
The number of available technologies is constantly rising. Be it additive manufacturing, artificial intelligence (AI) or distributed ledger technologies. The choice of the right technologies may decide the fate of a company. Due to the overwhelming amount of information sources, regular technology market research becomes increasingly challenging, especially for SMEs. In order to assist the technology management process, the authors will introduce the architecture of an automated, AI-based technology radar. The architecture will automatically collect data from relevant sources, assess the relevance of the respective technology (i.e. their maturity level) and then visualize it on the radar map.
Since 2016, the “Digital in NRW” Competence Centre has been supporting SMEs in the manufacturing industry in designing their individual digital transformation. With an Industry 4.0 maturity assessment, we define the status quo of SMEs, derive SME-specific measures from this, develop a digitalization roadmap and accompany the SME transformation. This paper presents the results of the four-year SME support. By analyzing the results of all maturity assessments, potential analysis and design workshops, we present the most frequent and most effective measures for a successful digital transformation of SMEs. The result of the paper is an action guideline for SMEs to initiate their own digital transformation based on formalized experience.
The technical development of the 5G mobile communication technology has been successfully completed. Now, vendor companies struggle with the analysis of industrial application and sales strategies as well as the development of business cases for their customers. Since this challenge is faced by many technology providers with innovative technologies in the “trough of disillusionment”, FIR’s information technology management has developed a methodology to bridge the gap, based on the example of 5G. This paper presents a methodology for identifying applications and defining business cases to select the most profitable ones. We also validate the methodology in the 5Gang research project.
The aim of the related research project eCloud is to enable small and medium sized enterprises (SMEs) to implement flexible energy management without in-depth energy knowledge and with little distraction from day-to-day business, which is prepared for current and future challenges in the field of energy use. The overall result is a validated prototype for a plug and automate capable (i.e. without implementation effort) operational energy management, which can be successively set up in SMEs based on a cloud platform. Through its gradual and modular implementation, energy management meets the individual needs of each company and contributes to energy system transformation and climate protection by reducing energy costs and greenhouse gas emissions by up to 25%. In total, three expansion stages are available with the levels of monitoring, load management and grid usage, which consist of various Software as a Service (SaaS) modules from the cloud that can be retrieved as required. Thus, the user only needs a minimal hardware intervention in his production and saves a complex IT infrastructure. The methodology developed has been successfully applied by two user companies so far. This proves the effectiveness of the method.
This paper addresses the challenge of a systematic requirement-oriented configuration and selection of cyber physical systems (CPS) for SMEs. As the key technologies of realizing the digitalization and interconnection of production processes, manufacturing companies have realized the potential benefits brought by CPS. However, due to the
complexity and fast development of CPS technology, it is difficult for SMEs, which lack expertise and financial resources, to select the appropriate CPS technologies meeting both functional and financial requirements. To overcome the issue, an online matching platform is developed to let SMEs express their needs and assist them onceptualize
the individual CPS. This paper presents the matching methodology of the matching platform, which can not only match technical characteristics but also evaluate economic potentials. Then, it was demonstrated by a tracking and tracing use case in the end-of-line assembly of a small-sized German electric automobile manufacturer.
People with tremor find it often very difficult to use IT services and therefore attain very low levels of effectiveness, efficiency and satisfaction, when doing so. The currently available user interfaces do not guarantee sufficient precision for information input. Individuals suffering from intention tremor show a significant worsening when moving towards a button, precisely because target-oriented movements produce shaking in the affected body parts. For this target group a new method regarding the information input has been developed and evaluated. This technique enables the persons concerned to input information on a touch screen by using a wiping movement. Variations caused by the tremor are compensated with a continuous movement rather than a single direct movement towards a target field. Moreover, the screen surface causes a significant friction that helps to damp tremor forces. The user input can be identified by the computer with high accuracy by means of special heuristics which also assist barrier free access among the target group.
It is crucial today that economies harness renewable energies and integrate them into the existing grid. Conventionally, energy has been generated based on forecasts of peak and low demands. Renewable energy can neither be produced on demand nor stored efficiently. Thus, the aim of this paper is to evaluate Deep Learning-based forecasts of energy consumption to align energy consumption with renewable energy production. Using a dataset from a use-case related to landfill leachate management, multiple prediction models were used to forecast energy demand.The results were validated based on the same dataset from the recycling industry. Shallow models showed the lowest Mean Absolute Percentage Error (MAPE), significantly outperforming a persistence baseline for both, long-term (30 days), mid-term (7 days) and short-term (1 day) forecasts. A potential decrease of up to 23% in peak energy demand was found that could lead to a reduction of 3,091 kg in CO2-emissions per year. Our approach requires low finanacial investments for energy-management hardware, making it suitable for usage in Small and Medium sized Enterprises (SMEs).
Smartification and digital refinement of products to enable the design of smart ones is a pivotal challenge in the manufacturing industry. Companies fail to design smart products due to missing knowledge of digital technologies and their integral part in product development processes. This paper presents a methodology that enables the derivation of digital functions for smart products through selected cases in manufacturing usage. We develop a morphology that consists of digital functions for smartification. In this context, we explained and derived characteristics by a set of examples regarding smart products in the manufacturing industry. Our methodology reduces the time spent initiating a development project with the focus on smartification.
This paper addresses the challenge of modelling individual cyber-physical systems (CPS) for small and medium-sized enterprises (SMEs) in manufacturing industries. CPS are key technology building blocks for the implementation of Industrie 4.0. Especially for SMEs the increase of production efficiency and reduction of manufacturing costs through CPS offer potential to maintain their competitiveness and innovation capacity. Although SMEs perceive the potential of CPS, they often lack financial and human resources to acquire the necessary CPS-competencies as well as an overview of all the currently available technological solutions. To overcome this issue a matching platform will offer SMEs support in finding suitable CPS-components by letting them express their functional and technical requirements. The matching logic is based on a set of morphologies that encompasses the functional and requirement spectrum of CPS-components. The matching algorithm analyses the input for congruence of requirements and available technologies and suggests suitable technology combinations. This paper describes the methodology of the matching platform, and introduces the research work to define and to develop the technology morphologies. The presented results facilitate the selection and configuration of CPS for SMEs.
Numerous traditional, agile and hybrid development approaches have been proposed for the development of CPS. As the choice of development process is crucial to the success of development projects, it has become a major challenge to identify the best-suited process. This paper introduces a methodology for identifying the best-suited CPS development process, based on the individual boundary conditions for a certain development project within a company. The authors used a set of eight indicators to assess a CPS-development project. The results of the assessment were matched with CPS-development approaches. Based on the matching results a best-suited development process was selected. The application is shown for a use case in the German manufacturing industry. The developed method aims to reduce the risk of project failure due to the wrong choice of development process.